stonecarpetworld.com
FAQ
Downloads

CementDEC® 3K - en

CementDEC® 3KEN

Brochure High performance Concrete Flooring System
Polyurethane Based for industrial self leveling flooring system Excellent adhesion to all construction materials
EAN-code
6150604052081
CementDEC® 3K
Packaging Options
A-3.5kg, B-3.5kg, C-17kg
Description

CementDEC® 3K Polyurethane Based Specially formulated with cement-based mortar for self leveling flooring system. For worn and old floors Highly performance all industrial floors applications. Excellency, highly hardness and compression strength (>70 MPa).

CementDEC® 3K is recommended for conditions requiring maximum high mechanical strength and exceptional resistance to physical and chemicals; topcoat use is optional due to its incredibly smooth surface after application. if requested : We recommend our Full aliphatic water based TopcoatDEC® AS-2K as a topcoat application.

CementDEC® 3K is a non-toxic product in case of contact with food products and drinking water. It can be used indoors and outdoors – in outdoor application slight discoloration is expected. if requested: We recommend our Full aliphatic water based TopcoatDEC® AS-2K product for 100% resistance to sunlight in outdoor applications.

  • Important features
  • CementDEC® 3K Polyurethane Based
  • Fast curing
  • Warm water resistance (80 °C - 100 °C).
  • Excellent biological and chemical resistance.
  • Can be applied to humid substrates.
  • Non-toxic
  • Hygienic material
  • Negative hydrostatic pressure resistant.
Packaging Types
Polyurethane - Part A / 3.50kg
Polyurethane - Part B / 3.50kg
Cement - Part C / 17kg
Features & Benefits
  • Excellent adhesion to all construction materials
  • High Impact Resistance
  • Abrasion and Scratch Resistance
  • High Chemical Resistance
  • Minimal Shrinkage
  • Sound, monolithic, wear resistant coat.
  • Delivers a smooth surface and the use of a topcoat is optional (see above)
  • Resistant to a wide range of temperature, non-combustible.
Application Areas
  • Heavy duty industrial floors
  • Protection of industrial floors
  • In food and beverage industry
  • Chemical industry floors
  • Pharmacy floors
  • Healthcare area floors
  • Electronics store floors
  • Mechanical engineering floors
  • Anti-static, non-sparking, anti-slip, anti- bacterial, non-dust and decorative coatings.
Technical Data
Potlife
± 25 minutes (20 °C)
Touch Drying Time
± 3 hours (25 °C)
Drying Time
24 hours (25 °C)
Walkable After
24 hours
Service Temperature
(-15  °C to +100  °C)
Mixing Ratio
1:1 Ratio
Consumption

Indicatively around 2 kg/m²/mm thickness.

Application Procedure

Clean the surface using a high pressure washer if possible.
Remove oil, grease and wax contaminants. Cement laitance, loose particles,mould release agents, cured membranes must also be removed.
The application surface must be dry.

Priming;
Priming is required before application water based EpoxyPRIMER® 2K.

Mixing CementDEC® 3K
Mix (Part/C cement-based mortar and Polyurethane Based part/B Blend parts for 2 minutes) and then add part A. Mix for 3 minutes until the liquid becomes homogeneous.
Use a spiral slow- speed mixer (150-200rpm).
The consistent mix must be spread up to a recommended thickness of 4-8mm as soon as the mixing is properly done.
Use steel trowel to smooth the new coating.
Use a spike roller to free the closed gases.

Cleaning;
Clean your tools and equipment with Cellulosic thinner during the application phase.

Brochure
www.anilo.nl info@anilo.nl
Revision Date: 02.01.2023