• High viscosity
• Great for outdoor kitchens and stair vertical veneers
• Strong vertical adhesive
• Excellent weather and UV resistance
• Excellent thermal resistance, the product never turns soft
• Max service temperature 80 °C, max shock temperature 200 °C
• Resistance to cold: The film remains elastic even down to -40 °C Excellent adhesion
• Excellent mechanical properties
• Good chemical resistance
• Water vapor transmission
• High adhesion on different surfaces
• Easy to apply on vertical surfaces
• Resistant to UV rays, rain, heat and frost
• Outstanding resistance to chemicals
• Outstanding hydrolysis and oxidation resistance
• Absolutely non foaming
• Comfortable application

• For Wall Surface
• Indoors & Outdoors Walls
• Stairs, Bathroom, Pool Walls
• All (Wet) Vertical Surfaces
• Concrete, Tile , Marble
• Plasterboard, Hardwood Plywood
• OSB, Flake boards
• Chipboard Board Lumber Wood
• Ytong - Block, Brick

Consumption Application method for Vertical surfaces;

1 Mix 7% Wall Binder with the weight of the dry granules.

2 Cover the surface with WallBINDER 1 m2 (130 gr) with a trowel on the wall.

3 Then, apply the granules that you mixed with WallBINDER® 1K to the vertical wet surface with a trowel and smooth it.

The application surface must be dry.

Stage 1 WallBINDER® 1K Add high viscosity full aliphatic polyurethane binder on marble or colored quartz granules and mix until a homogeneous mixture is obtained (2 minutes).

Stage 2 Apply the wall binder as a primer, the surface consumption of our Wallbinder product on the wall as a primer is / 130 grams for 1 m2 surface.

Stage 3 Continue by applying our WallBINDER chemical to the wall in part by part, like a primer, and applying the granule at the same time, that is, do not apply the primer to the entire wall at once.

Stage 4 Then, apply the granules you mixed with WallBINDER to the wall with a trowel. This application is a wet ,wet application method.

Stage 5 Apply from the ground up and press the granules evenly. Compress the coated surface by applying uniform pressure to the trowel.

During the vertical stone carpet application;
For a more comfortable application, spray the granules and your trowel with a mixture of 20% glass cleaning water and 80% tap water.
Clean your trowel frequently with Cellulose thinner during the application phase.

Application temperature range: (+05 °C) to +50°C)
Do not apply under rain or snow.
Relative humidity must be no more than 85%.
Try to eliminate the cured material on the walls of the mixing vessels.
WallBINDER® 1K in a cool environment,avoiding exposure to direct sunlight make sure it stays under the shade provided.