stonecarpetworld.com

IntoDEC® MS-1K

One Component Indoor Binder

Polyurethane based binder, specially formulated for stone carpet floor application

IntoDEC® MS-1K Polyurethane binder specially formulated stone carpet floor application. which cures with the humidity in the atmosphere It is 100% solids, low viscosity, odorless, very elastic and hydrophobic with excellent adhesion for indoor stone carpet application and zero-toxic ( zero V.O.C.).

After curing Resistant to water contact and chemicals.

The application requires mixing 4-6% of the binder weight of the product with colored quartz and marble granules. If the infrastructure requires waterproofing in stone carpet applications, PoreFILLER® P-1K should be applied under the stone carpet layer.

Do not leave the packaging lid open during the application phase and the open product can be saved for the next application using the packages lid open and close method.

  • Important features
  • IntoDEC® MS-1K ideal for use in warm weather
  • Special formulated for summer season
  • Due to continuous water contact and rainwater, no lime or chlorine water stains occur
  • Water contact resistance
  • Hydrophobic
Packaging Types
5kg 10kg 20kg
Pallet Description
5 kg
120pcs X 5kg
Total 600kg
10 kg
60pcs X 10kg
Total 600kg
20 kg
30pcs X 20kg
Total 600kg
Potlife
± 45 minutes. (20 °C)
Touch Drying Time
± 8 hours.(25 °C)
Drying Time
24 hours (25 °C)
Walkable After
24 hours
Service Temperature
(-40 °C) - (+80 °C)
  • Transparent
  • Continuously flexible floors
  • The material displays very low levels of yellowing upon prolonged exposure to UV
  • Excellent mechanical properties
  • Outstanding resistance to chemicals
  • Outstanding hydrolysis and oxidation resistance
  • Absolutely non foaming
  • Comfortable application
  • IntoDEC®-MS 1K, binder aggregate, system for decorative internal floor surfacing
  • Continuously flexible floors
  • Showrooms
  • Living areas
  • Shops
  • Supermarkets
  • Offices
  • Schools and colleges

Consumption 4-6% Weight of the dry granules.

The exact ratio depends on the dust content of the granules.

Clean the surface using a high pressure washer if possible.

Remove oil, grease and wax contaminants. cement laitance, loose particles, mould release agents, cured membranes must also be removed. The application surface must be dry.

Priming: Priming is required when application is on non-porous substrates, such as ceramic/glazed tiles. In this case, Primer-D 1K is used.

During the floor stone carpet application;
For a more comfortable application, spray the granules and your trowel with a mixture of 20% glass cleaning water and 80% tap water.
Clean your trowel frequently with Cellulosic thinner during the application phase.

GardenDEC® AF-1K

GardenDEC® AF-1K

For Use OUTDOOR Explore
GardenDEC® AY-1K

GardenDEC® AY-1K

For Use OUTDOOR Explore
GardenDEC® AP-2K

GardenDEC® AP-2K

For Use OUTDOOR Explore
GardenDEC® AL-2K

GardenDEC® AL-2K

For Use OUTDOOR Explore
IntoDEC® MS-1K

IntoDEC® MS-1K

For Use INDOOR Explore
IntoDEC® MP-2K

IntoDEC® MP-2K

For Use INDOOR Explore
IntoDEC® MX-2K

IntoDEC® MX-2K

For Use INDOOR Explore
WallBINDER® 1K

WallBINDER® 1K

For VERTICAL SURFACES Explore
PoreFILLER® P-1K

PoreFILLER® P-1K

For Use OUTDOOR/INDOOR Explore
PoreFILLER® A-1K

PoreFILLER® A-1K

For Use INDOOR Explore
Primer® D-1K

Primer® D-1K

Before Stone Carpet Application Explore
Primer® F-1K

Primer® F-1K

Before Stone Carpet Application Explore