stonecarpetworld.com

GardenDEC® AL-2K

Two Component Outdoor Binder

Aliphatic polyurethane binder, specially formulated for stone carpet floor application

A:8kg + B:12kg GardenDEC® AL-2K
A:8kg GardenDEC® AL-2K
B:12kg GardenDEC® AL-2K

GardenDEC® AL-2K Aliphatic polyurethane binder, specially formulated for stone carpet floor application which cures with the humidity in the atmosphere It is 100% solids, low viscosity and hydrophobic with excellent adhesion for outdoor stone carpet application. It is fast curing and zero-toxic (zero V.O.C.). Excellent resistance to mechanical, chemical, thermal, UV, continuous water contact and extreme weather conditions.

Binder Color: (Comp. A dark brown) - (Comp. B transparent yellow)

Application: Recommended for dark colored stone, granules

The application requires mixing 4-6% of the binder weight of the product with colored quartz and marble granules. If the infrastructure requires waterproofing in stone carpet applications, PoreFILLER® P-1K should be applied under the stone carpet layer.

  • Important features
  • GardenDEC® AL-2K ideal for use in cold weather
  • Special formulated for the winter season
  • Due to continuous water contact and rainwater, no lime or chlorine water stains occur
  • Highly Hydrophobic
  • Highly sunlight resistance
  • Odorless
Packaging Types
A Comp. 8kg B Comp. 12kg
Pallet Description
A Comp.
8 kg
60pcs X 8kg
Total 480kg
B Comp.
12 kg
60pcs X 12kg
Total 720kg
Potlife
± 25 minutes (20 °C)
Touch Drying Time
± 2 hours (25 °C)
Drying Time
24 hours (25 °C)
Walkable After
8 hours
Service Temperature
(-40 °C) - (+80 °C)
Mixing Ratio
1/1,5 Ratio (1000gr A + 1500gr B)
  • Solvent-less: Suitable for application in closed spaces
  • UV resistance
  • Highly hydrophobic
  • Excellent mechanical properties
  • Strong granule binder
  • Outstanding resistance to chemicals
  • Outstanding hydrolysis and oxidation resistance
  • Absolutely non foaming
  • Comfortable application
  • Outdoor
  • Car Parks and Garages
  • Squares and Parks
  • Areas with a lot of car traffic
  • Driveways, Terraces, Pool Sides
  • Paths and walkways
  • Verandas and balconies
  • Outdoor recreation areas
  • Ideal for pathways
  • Garage ramps
  • Cycle paths
  • Parking areas
  • Pedestrian crossings
  • Secondary roads

Consumption 4-6% Weight of the dry granules.

The exact ratio depends on the dust content of the granules.

Clean the surface using a high pressure washer if possible.

Remove oil, grease and wax contaminants. cement laitance, loose particles, mould release agents, cured membranes must also be removed. The application surface must be dry.

Priming: Priming is required when application is on non-porous substrates, such as ceramic/glazed tiles. In this case, Primer-D 1K is used.

During the floor stone carpet application;
For a more comfortable application, spray your trowel with a mixture of 20% glass cleaning water and 80% tap water.
Clean your trowel frequently with Cellulosic thinner during the application phase.

GardenDEC® AF-1K

GardenDEC® AF-1K

For Use OUTDOOR Explore
GardenDEC® AY-1K

GardenDEC® AY-1K

For Use OUTDOOR Explore
GardenDEC® AP-2K

GardenDEC® AP-2K

For Use OUTDOOR Explore
GardenDEC® AL-2K

GardenDEC® AL-2K

For Use OUTDOOR Explore
IntoDEC® MS-1K

IntoDEC® MS-1K

For Use INDOOR Explore
IntoDEC® MP-2K

IntoDEC® MP-2K

For Use INDOOR Explore
IntoDEC® MX-2K

IntoDEC® MX-2K

For Use INDOOR Explore
WallBINDER® 1K

WallBINDER® 1K

For VERTICAL SURFACES Explore
PoreFILLER® P-1K

PoreFILLER® P-1K

For Use OUTDOOR/INDOOR Explore
PoreFILLER® A-1K

PoreFILLER® A-1K

For Use INDOOR Explore
Primer® D-1K

Primer® D-1K

Before Stone Carpet Application Explore
Primer® F-1K

Primer® F-1K

Before Stone Carpet Application Explore