stonecarpetworld.com
FAQ
Downloads

GardenDEC® AY-1K - en

GardenDEC® AY-1KEN

TDS One Component Outdoor Binder
Full aliphatic polyurethane binder specially formulated for stone carpet floor application
EAN-code
6151148962997
GardenDEC® AY-1K
Packaging Options
4kg, 10kg, 20kg
Description

GardenDEC® AY-1K is Full aliphatic Polyurethane binder. Specially formulated for stone carpet floor application.

GardenDEC® AY-1K is highly hydrophobic, it does not yellow, and granules do not change color exposed to extreme sunlight. Which results in excellent resistance to mechanical, chemical, thermal, continuous water contact and extreme weather conditions. It does not yellow, and granules do not change color exposed to extreme sunlight. Which results in excellent resistance to mechanical, chemical, thermal, continuous water contact and extreme weather conditions.

GardenDEC® AY-1K It is fast curing and zero-toxic (zero V.O.C.).100% solids.

The application requires mixing 6% of the binder weight of the product with colored quartz and marble granules. If the infrastructure requires waterproofing in stone carpet applications, PoreFILLER® P-1K should be applied under the stone carpet layer.

Do not leave the packaging lid open during the application phase and the open product can be saved for the next application using the packages lid open and close method.

  • Important features
  • GardenDEC® AY-1K ideal for use in cold weather
  • Special formulated for winter season
  • Due to continuous water contact and rainwater, no lime or chlorine water stains occur
  • Inhibits fungal and bacterial growth
  • Highly Hydrophobic
  • Highly sunlight resistance
  • Full Aliphatic
  • Odorless
Packaging Types
4kg, 10kg, 20kg
Pallet Description
4 kg
125pcs X 4kg
Total 500kg
10 kg
60pcs X 10kg
Total 600kg
20 kg
30pcs X 20kg
Total 600kg
Features & Benefits
  • Solvent-less, 100% solids.
  • Transparent, Full Aliphatic
  • Fully aliphatic, no yellowing resulting from UV exposure
  • Excellent resistance to heat, it will not yellow, peel or soften up to 90 °C
  • Very high resistance to mechanical stresses, high tensile strength and abrasion resistance
  • Excellent resistance to severe weather conditions
  • Outstanding resistance to chemicals
  • Outstanding hydrolysis and oxidation resistance
  • Absolutely non foaming
  • Comfortable application
Application Areas
  • Outdoor
  • Car Parks and Garages
  • Squares and Parks
  • Areas with a lot of car traffic
  • Driveways, Terraces, Pool Sides
  • Paths and walkways
  • Verandas and balconies
  • Outdoor recreation areas
  • Ideal for pathways
  • Garage ramps
  • Cycle paths
  • Parking areas
  • Pedestrian crossings
  • Secondary roads
Technical Data
Potlife
± 35 minutes (20 °C)
Touch Drying Time
± 3 hours (25 °C)
Drying Time
24 hours (25 °C)
Walkable After
12 hours
Service Temperature
(-40 °C) - (+80 °C)
QUV Accelerated Weathering Test
(6hr UV, at 70 °C (UVB-Lamps) & 6hr COND at 60 °C) - Passed 4000 hours.
Consumption

Consumption 6% Weight of the dry granules.

The exact ratio depends on the dust content of the granules.

Application Procedure

Clean the surface using a high pressure washer if possible.

Remove oil, grease and wax contaminants. cement laitance, loose particles, mould release agents, cured membranes must also be removed. The application surface must be dry.

Priming: Priming is required when application is on non-porous substrates, such as ceramic/glazed tiles. In this case, Primer-D 1K is used.

During the floor stone carpet application;
For a more comfortable application, spray your trowel with a mixture of 20% glass cleaning water and 80% tap water.
Clean your trowel frequently with Cellulosic thinner during the application phase.

Technical Data Sheet (Page/1)
www.anilo.nl info@anilo.nl
Revision Date: 02.01.2023

GardenDEC® AY-1K - en

GardenDEC® AY-1KEN

TDS One Component Outdoor Binder
Full aliphatic polyurethane binder specially formulated for stone carpet floor application
Technical Specifications
PROPERTY UNITS METHOD SPECIFICATION
Viscosity (Brookfield) cP at 25 °C 2,000-3,500
Solids % - 100
Service temperature °C - -40 to 80
Max. temperature short time (shock) °C - 200
Hardness hours - 8-24
Service temperature °C - -40 to 80
Max. temperature short time (shock) °C - 200
Hardness Shore D - 60
Percent elongation at 23 °C % - > 100
QUV Accelerated Weathering
Test (6hr UV, at 70 °C (UVB-Lamps) & 6hr COND at 60 °C)
- - passed
(4,000 hours)
Thermal resistance
(100 days at 80 °C)
- - passed
Chemical (Hydrolysis) Resistance
Potassium Hydroxide, 8% 14 days at 50 °C no significant
elastomeric
property change
Sodium Hypochlorite, 5% 14 days at 50 °C no significant
elastomeric
property change
Water absorption - 0.5%
Technical Data Sheet (Page/2)
www.anilo.nl info@anilo.nl
Revision Date: 02.01.2023