IntoDEC® MS-1K - en
IntoDEC® MS-1KEN
6151153215279
IntoDEC® MS-1K Polyurethane binder specially formulated stone carpet floor application. which cures with the humidity in the atmosphere It is 100% solids, low viscosity, odorless, very elastic and hydrophobic with excellent adhesion for indoor stone carpet application and zero-toxic ( zero V.O.C.).
After curing Resistant to water contact and chemicals.
The application requires mixing 6% of the binder weight of the product with colored quartz and marble granules. If the infrastructure requires waterproofing in stone carpet applications, PoreFILLER® P-1K should be applied under the stone carpet layer.
Do not leave the packaging lid open during the application phase and the open product can be saved for the next application using the packages lid open and close method.
- Important features
- IntoDEC® MS-1K ideal for use in warm weather
- Special formulated for summer season
- Due to continuous water contact and rainwater, no lime or chlorine water stains occur
- Water contact resistance
- Hydrophobic
- Transparent
- Continuously flexible floors
- The material displays very low levels of yellowing upon prolonged exposure to UV
- Excellent mechanical properties
- Outstanding resistance to chemicals
- Outstanding hydrolysis and oxidation resistance
- Absolutely non foaming
- Comfortable application
- IntoDEC®-MS 1K, binder aggregate, system for decorative internal floor surfacing
- Continuously flexible floors
- Showrooms
- Living areas
- Shops
- Supermarkets
- Offices
- Schools and colleges
Consumption 6% Weight of the dry granules.
The exact ratio depends on the dust content of the granules.
Clean the surface using a high pressure washer if possible.
Remove oil, grease and wax contaminants. cement laitance, loose particles, mould release agents, cured membranes must also be removed. The application surface must be dry.
Priming: Priming is required when application is on non-porous substrates, such as ceramic/glazed tiles. In this case, Primer-D 1K is used.
During the floor stone carpet application; For a more comfortable application, spray your trowel with a mixture of 20% glass cleaning water and 80% tap water. Clean your trowel frequently with Cellulosic thinner during the application phase.
IntoDEC® MS-1K - en
IntoDEC® MS-1KEN
Technical Specifications
| PROPERTY | UNITS | METHOD | SPECIFICATION |
|---|---|---|---|
| Viscosity (Brookfield) | cP | at 25 °C | 1,000-3,000 |
| Specific weight | gr/cm³ | at 20 °C | 1.00-1.10 |
| Service temperature | °C | - | -40 to 80 |
| Max. temperature short time (shock) | °C | - | 200 |
| Hardness | Shore D | - | > 40 |
| Tensile strength at break at 23 °C | Kg/cm² (N/mm²) |
- | 350 (35) |
| Percent elongation at 23 °C | % | - | > 700 |
| Water vapor transmission | gr/m².hr | Water Method | 0.8 |